Primary tabs
Scale and Corrosion Inhibitor for Cooling Water
SKU::RXSOL-40-4091-025
Metallic corrosion and scale controlling advanced formulated product for open and closed cooling systems. A blend of phosphonate, and polymers incorporating dispersants. It is designed for the prevention of hardness deposition in recirculating or once through cooling systems using moderate to high hardness make-up water. RXSOL Scale and Corrosion Inhibitor is scientifically formulated from a combination of polymers to offer excellent calcium along with general scale inhibition in cooling water systems, even under extreme system conditions. RXSOL Scale and Corrosion Inhibitor is made up of halogen stable polymers that do not form insoluble calcium salts when added to hard waters.
A high-performance, multi-functional cooling water treatment designed to deliver complete system protection in demanding industrial environments.
-
Prevent scale formation even in high-hardness waters.
-
Stop corrosion on steel, copper, brass, and other metals
-
Control microbiological fouling, keeping systems clean and efficient.
Formulated for open recirculating, closed loop, and once-through systems, Scale and Corrosion Inhibitor for Cooling Water ensures maximum heat transfer efficiency, extended equipment life, and reduced unplanned downtime.
Whether protecting cooling towers, heat exchangers, or industrial chillers, Scale and Corrosion Inhibitor for Cooling Water delivers consistent, reliable performance under a wide range of operating conditions.
Scale and Corrosion Inhibitor is halogen stable and can be used with oxidising biocide programmes. The product retards metal oxide formation, and passivates precipitation zones by dispersion.
Key Areas of Application of Scale and Corrosion Inhibitor for Cooling Water
- Open Recirculating Cooling Towers – Protection against corrosion, scaling, and microbiological fouling in process and HVAC cooling towers.
- Closed Loop Chilled Water & Hot Water Systems – Long-term corrosion and scale prevention in sealed or semi-sealed systems.
- Once-Through Cooling Systems – Ideal for systems where water is not recirculated but equipment still requires protection from scaling and corrosion.
- Heat Exchangers & Condensers – Maintains clean heat transfer surfaces for maximum efficiency.
- Industrial Process Cooling – Suitable for steel plants, chemical industries, petrochemicals, refineries, paper mills, and food processing facilities.
- Air Compressor & Engine Jacket Cooling Systems – Prevents corrosion and scaling in auxiliary cooling circuits.
The target dosage range is 3 - 5 ppm as PO4-3 in the recirculating cooling water.
Dosage Strategy
RXSOL Scale and Corrosion Inhibitor should be fed continuously to an area of good mixing. The product may be fed directly or may be diluted with good quality water and fed from a chemical dosing tank.
Performance Monitoring
Appropriate use of RXSOL Scale and Corrosion Inhibitor following the above dosing strategy should result in a corrosion rate of less than 2 mpy.
Test Methods
Phosphonate Drop test - Thorium Nitrate titration
Phosphonate UV photolysis + colour disc
- Feed neat or pre-diluted via a metering pump directly into the cooling tower basin or recirculating line.
- For microbiological control, slug dose biocide component 2–3 times per week depending on biological loading.
Handling : Do not breathe vapours or spray mist. Avoid contact with skin and eyes. . Provide sufficient air exchange and/or exhaust in work rooms. Avoid exceeding of the given occupational exposure limits. Smoking, eating and drinking should be prohibited in the application area. Normal measures for preventive fire protection.
Storage : Store in original container. Keep containers tightly closed in a dry, cool and well-ventilated place. Stable under recommended storage conditions. Protect from frost.
Physical Proerties
| Appereance | : Liquid |
| Colour | : Yellow |
| Odour | : None |
| Boiling Point | : 100 °C |
| Freezing Point | : 0 °C |
| pH | : 2.5 |
| Solubility In Water |
: Soluble |
Scale and Corrosion Inhibitor for cooling water systems for treatment manufacturer supplier and exporter. Scale and Corrosion Inhibitor manufacturer in India UAE Oman Canada. High quality premium scale corrosion inhibitor.
Advantages of Scale and Corrosion Inhibitor for Cooling Water
- Multi-functional – controls corrosion, scale, and microbiological growth in one product.
- Effective in hard water – threshold inhibition and dispersion prevent scale deposition.
- Broad spectrum – active against bacteria, algae, and fungi.
- Reduces downtime – maintains heat transfer efficiency and prolongs equipment life.
Scale and Corrosion Inhibitor for Cooling Water Treatment chemicals.
Compatibility of Scale and Corrosion Inhibitor for Cooling Water
- Compatible with most non-oxidizing biocides.
- When using oxidizing biocides, feed separately to avoid degradation of this synergistic product.
- Avoid direct mixing with cationic polymers.
Scale and Corrosion Inhibitor for Cooling Water is manufacturer and supplier in Mumbai, Kandla Deen Dayal Upadhya - Gandhidham, Mundra, Sikka Jamnagar, Surat Gujrat, Manglore, Goa, Chennai, Ennore, Visakhapatnam, Gangavaram, Kolkata, Buj Buj, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abudhabi, Oman - Muscat.