Primary tabs
Lime Remover HD
SKU::RXSOL-22-2213-210
LIME REMOVER HD is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove lime deposit accumulations from cargo and storage tanks. It is a liquid product designed to Clean and eliminate limestone caustic lime deposits and dry lime stains from cargo tanks and other large common metal surface installations.
Use For remove heavy lime deposition from metal surface.
It is highly concentrated and powerful penetrating agents materials which is effectively react with lime to loosen the bonding strength . Best results can obtain on dry surface of LIME. It break down the ionic bond in lime, releasing the lime from any surface to which it has adhered.
This liquid mixture specifically designed to deal with hard cases of lime cargo deposits or dry lime stains. Its proven advantage is the provision of immediate penetration and complete dissolution of lime, the result being a thorough cleaning.
ACTIVE MATTER : 98-100 %
WHY RXSOL22-2213-210 is better ?
Biodegradable & non flammable , Economical very cost effective
Non-hazardous
Non-fuming
Safe for paint, chrome, aluminum, glass, rubber, plastic, brass & stainless
Dissolves cured cement, concrete, mortar, grout, stucco
Cleans aluminum
Also comes with a foaming spray nozzle
Will not remove rubberized cement
Suitable for the removal of cement deposits and dry stains.
Due to its higher concentration its chemical reaction is very fast.
Lime Remover HD must be used according to the hold surface area that is to be covered, the extent of contamination, the available downtime and the application method being used. Lime Remover HD is covering 10-12 Squire Meter area.
Using Procedure
I - Spray Method
Spray Method is applicable where a high–pressure machine, suitable to process chemical solutions, is used with a 50% Lime Remover HD/water solution to inject directly onto the surface area. Then, the solution must be left to act for 15 minutes followed by thorough rinsing using a high–pressure water supply source. After , the surface must be left to dry. The percentage of dilutions may vary depending on the thickness and hardness of the deposited lime.
II – Soaking Method
Soaking is a method where Lime Remover HD is used undiluted and applied with conventional methods such as an elongated thick and hard brush, a hard sponge etc. Once applied, Lime Remover HD must be left to soak for 30 minutes. Rinse with water, and followed by leaving the surface to dry. Usually, this method is applicable to heavily contaminated small and large tank surface areas and installations.
Feature and Benefit :
• Ideal for the removal of limestone, birdlime and dry lime stains from all common metal tanks surface and installations.
• Applicable to all metal surfaces and parts except those being galvanized and those made of Tin, Zinc, Aluminum and Lead.
• A water–soluble, non–flammable liquid mixture.
• Can be used to safely neutralize strong alkaline liquids and solids.
• No known effect on rubber or plastic compounds.
• May be combined with a specific range of other products.
• Cost effective, easy to apply and use.
Lime Remover HD is a concentrated aqueous solution consisting of a blend of special surfactants and specific corrosion inhibitors.
Appearance / Color : Clear liquid
Specific gravity : 1.10–1.20 at 15°C
Solubility in water : 100% Soluble
Boiling Point : 100 °C
Lime out cleaner for changing hard deposits of LIME into loose bond in sludge formation, chemically its neutralizing lime of alkali and breaking solid deposited bond of LIME from ship cargo hold and storage tanks.
Why Lime Cleaner used for Ship Hold cleaning?
Before cleaning of lime, we have to learn about lime composition and its bonding nature as well as dissolving properties of lime.
Lime is composit mixture of calcium and its powder state becomes lumps due to presence of moisture. Here it is clear that if you want to remove composed lime from surface calcium bond should be break. Means if we'll add such material on lime bonded surface which can weaken the bond of calcium, then cleaning of lime from surface will be easy.
Acid like muriatic, phosphoric, sulfuric etc easily breaking the bond of hardened calcium, but these acids are highly corrosive not only to handle but also dissolving iron metals, which is causing pit and roughness on metals surface.
Then again question comes how to remove lime without damaging the metal surface and also easy to use by personnel.
We worked on this concept and developed Lime cleaner remover with effective blend of corrosion inhibitors and we balanced acid with mixture formulations.
Lime cleaner save time to remove lime deposition from ship hold surface. And lime remover easily dissolves and break lime deposited hard bond also due to non fuming nature its application becomes easier.
We have lime cleaner standards packing is in 25, 50, 210 litre drum.
And feel happy to say that we are largest lime cleaner suppliers in Kandla Deen Dayal Upadhya port, Hazira, Mumbai, Goa, Chennai Ennore, visakhapatnam, gangavaram, Kolkata, Haldia, paradip, fujairah, sharjah, Dubai, Abudhabi.
Email us to get more details of lime cleaner and also get factory sale discounted price mail@rxmarine.com
Marichem Lime Cleaner, Chemo Lime Out and Marichem Lime Cleaner, Lime Wash
34029019
Lime Remover HD is formulated with strong Surfactant agents and special corrosion inhibitors, sufficient acidic effect enough to neutralize strong alkali content of lime, which makes LIME OUT from deposited surface.
Lime Wash cleaning chemicals manufacturer and supplier in India and Middle East - UAE. We are keeping ready stock in various packing size. Lime remover supplier in Mundra, Kandla, Sikka, Navlakhi, Hazira, Mumbbai, Nhava Seva, JNPT, Manglore, Kakinada, Chennai, Ennore, Visakhapatnam, Gangavaram, Kolkata, Haldia, Paradip, Fujairah, Dubai, Ajman, Abudhabi, Sharjah, Muscat, BArka, Sohar OMAN
