Primary tabs
Corrosion Inhibitor Fluid
SKU::RXSOL-68-6815-025
Corrosion Inhibitor is a low viscosity multi-purpose corrosion inhibitor and widely applicable and easily washable. It has strong effectiveness for ferrous and non ferrous metal.
This classified Corrosion Inhibitor also wroks for light lubricanting. General cleaning and preventative.
- Can resist severe atmosphere.
- Low viscosity, fast dry and mere residue.
- Multi-metal protection
- Salt Spray Test-passes 90 hours
Corrosion Inhibitor can be apply on Machine parts, Cable, Chain, Pulley, Bare Metal Tolls, Shaft, Gear, Spring, Pipe, Engine, Roller Bearing, Motor, Pin, Spare-parts, structure.
- Typical Properties
- Density (15/4 0C) 0.79
- Viscosity (40 0C, cSt) 2.34
- Flash Point 54 0C
- Color (ASTM) 3.5
- Wet film Thickness 2.5-3.5
- Non volatile
Content (105 0C x2hr, %) 22
Corrosion Inhibitor Fluid manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Corrosion Inhibitor Fluid at a competitive price from us. We have ready stock of Corrosion Inhibitor Fluid in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
- Dipping, Sparying or Brushing
- Test
|
|
ASTM |
DFT |
Carbon Steel 101 |
|
Humidit |
D-1748 |
2.5-3.5 |
500 hr+ |
|
Salt Spary |
B-117 |
2.5-3.5 |
90 hr+ |
-
Removing - It needed, any petroleum, alkaline and chloric cleaners will be applicable.
- Caution
- Before applying, the surface should be cleaned from grease, oil and contaminations.
- Should be stored good ventilated and cool plece.
- Keep away from hear, sparks, flame or other sources of ignition.
