BIOCIDE - BIOSPERSE

Primary tabs

FREE SHIPPINGFree shipping on all orders over 100000 INR.

BIOCIDE - BIOSPERSE

0
No votes yet
SKU::RXSOL-43-4092-210

Product Qty Per Unit: 
210.00
Product usage unit: 
Ltr.

Negotiate Price

Category: 
Drilling Fluids & Mud Oil Field chemicals-81
Generic Name: 

Biosperse biocide for control of bacteria, fungi and algae in industrial water systems such as recirculating water systems, pasteurizers, air washer systems, membrane separation systems, coatings, emulsion polymers and adhesives.

Product Description: 

Biosperse biocide for control of bacteria, fungi and algae. Biosperse 250 provides long lasting killing effects and is recommended in systems with a pH between 6-9,5. Biosperse 250 is easily detoxified so it can be applied even in environmentally sensitive areas.

Product Application: 

Is a broad-spectrum biocide, which very effectively controls spore and non-spore forming bacteria, SRB’s, Fe-bacteria, algae and fungi. Provides a long-lasting killing effect, which enables less frequent biocide additions. Provides synergetic killing when applied in combination with Biosperse 2545.

Product Procedure: 
Feeding The quantity of Biosperse 250 required for any given application will depend on such factors as the type and volume of the system, the extent of microbiological contamination and the degree of control required. Biosperse 250 may be fed directly from the drum or diluted with water and fed by any suitable chemical feed system. Biosperse 250 should be dosed directly into the sump or basin or any location where good distribution can be assured.
Product Note: 
Product Technical Specification: 
 
Appearance : clear, light green liquid
pH : 3.5
Density (kg/m3) : 1030
Solubility : completely miscible in water
Flash Point : none

These data are to be seen as typical values and should not be considered as specifications.

Product pack size: 
25 Ltrs, 50, 210 Ltrs.
Product alias: 
Remarks: 
Handling Precautions

Wear suitable protective gloves and safety goggles. In case of contact immediately flush with water. After eye contact seekmedicaladvice. If swallowed, drink large quantities of milk, egg whites or a gelatine solution. If these are not available, drink large quantities of water. Do not induce vomiting. Seek medical advice immediately. Small spills can be flushed with water. Large spills should be collected for disposal. Use Biosperse 250 safely. Always read label and product information (M.S.D.S.) before use.

Packaging
This product is available in a variety of packaging sizes. 
Important Information

Typical Properties: Refer to the Material Safety Data Sheet (MSDS).

Regulatory Information
Refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.

Safety
Use the health and safety information contained in the MSDS to develop appropriate product handling procedures to protect your employees and customers. Our MSDS should be read and understood by all of your supervisory personnel and employees before using.

BIOCIDE - BIOSPERSE manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of BIOCIDE - BIOSPERSE at a competitive price from us. We have ready stock of BIOCIDE - BIOSPERSE in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.


Product Delivery Locations: 
Kattupalli Port ( L & T Shipbuilding Limited shipyard ), Ennore Port ( Coromondel International Limited Port Area ), Chennai Port, Mugaiyur port, Thiruchopuram port, Silambimangalam Shipyard, Parangipettai port, PY-03 Oil Field, Kaveri port, Vanagiri port, Thirukkadaiyur port, Thirukkuvalai port, Punnakkayal port, Udangudi port, Manappad port, Koodankulam port, Chettinad Tharangambadi Port, Mathur SIDCO Industrial area, Sipcot Industrial Park Malayambakkam