Primary tabs
BIOCIDE - BIOSPERSE
SKU::RXSOL-43-4092-210
Biosperse biocide for control of bacteria, fungi and algae in industrial water systems such as recirculating water systems, pasteurizers, air washer systems, membrane separation systems, coatings, emulsion polymers and adhesives.
Biosperse biocide for control of bacteria, fungi and algae. Biosperse 250 provides long lasting killing effects and is recommended in systems with a pH between 6-9,5. Biosperse 250 is easily detoxified so it can be applied even in environmentally sensitive areas.
Is a broad-spectrum biocide, which very effectively controls spore and non-spore forming bacteria, SRB’s, Fe-bacteria, algae and fungi. Provides a long-lasting killing effect, which enables less frequent biocide additions. Provides synergetic killing when applied in combination with Biosperse 2545.
Appearance : | clear, light green liquid |
pH : | 3.5 |
Density (kg/m3) : | 1030 |
Solubility : | completely miscible in water |
Flash Point : | none |
These data are to be seen as typical values and should not be considered as specifications.
Wear suitable protective gloves and safety goggles. In case of contact immediately flush with water. After eye contact seekmedicaladvice. If swallowed, drink large quantities of milk, egg whites or a gelatine solution. If these are not available, drink large quantities of water. Do not induce vomiting. Seek medical advice immediately. Small spills can be flushed with water. Large spills should be collected for disposal. Use Biosperse 250 safely. Always read label and product information (M.S.D.S.) before use.
Packaging
This product is available in a variety of packaging sizes.
Important Information
Typical Properties: Refer to the Material Safety Data Sheet (MSDS).
Regulatory Information
Refer to the MSDS or contact your sales representative for any additional regulatory and environmental information.
Safety
Use the health and safety information contained in the MSDS to develop appropriate product handling procedures to protect your employees and customers. Our MSDS should be read and understood by all of your supervisory personnel and employees before using.
BIOCIDE - BIOSPERSE manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of BIOCIDE - BIOSPERSE at a competitive price from us. We have ready stock of BIOCIDE - BIOSPERSE in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.