Primary tabs
Turbo Cleaner Dry Walnut Shell
SKU::RXSOL-16-1035-010
Walnut shell Soft Abrasive for turbo cleaning, filter media, Oil absorption, polishing gems and jewellery and many more.
Walnut Shell Grit is a Hard and Fibrous product made from crushed Walnut Shell with international trade standard and it is the most soft type ...
Walnut Shell supplier and exporter from India to Middle East, Turkey, Russia, Canada.Walnut Shell abrasive is a hard and fibrous product made from crushed walnut shells in accordance with International Trade Standard. Our major stock mesh property of walnut is as follows
06 – 10 Mesh (Coarse)
08 – 12 Mesh (Coarse)
12 – 20 Mesh (Medium)
18 – 40 Mesh (Fine)
Removal of Paint, Flash, Burrs and other flaws in plastic, alloy die casting and electronics
Cleaning Automotive parts
Cleaning Aircraft engines and turbines
Removing Graffiti
Architectural cleaning and restoration of steel, wood, brick, stone or concrete
Polishing and cleaning of fine metals and alloys
Walnut shell is soft abrasive for industrial use. Walnut Shell has excellent durability.
Walnut shell also used to blast clean and polish soft metals, glass, fiberglass, wood, plastic and stone.
Walnut Shell is used in both tumbling and vibratory applications for polishing gems and jewellery. It also works as a de-burring and de-flashing product for molding, casting and electrical parts.
Walnut Shell is ground to various sizes ranging from coarse to extra fine, allowing for a fine degree of control over the desired finish. Like other soft media, Walnut Shell cleans and removes matter from surfaces without damaging underlying material.
Wide range of grades available, including custom orders
Gentle – clean surfaces without damaging underlying material
Porous – can be used to absorb contaminants
Organic: renewable and environmentally friendly
100% silica-free
Re-usable
Specification :
Physical Characteristics
| Appearance: | Brown color, solid natural granules |
| Size: | 1 - 1.5 mm. (new tolerance) Also refer above " Description " section |
| Corrosive action | None |
| Safety Risk / Advise |
None |
| Specific Gravity: | 1.2 – 1.4 |
| Hardness: | 3 on MOHS scale |
| Moisture: | NMT 11% by weight |
| PH: | 7.5 |
| GSA Specification: | AA‐1722 Type 2 |
| Chemical Analysis ‐ % by weight |
Nitrogen: .10 Specific Cellulose: 40/60 Lignin: 20/30 Toluene: .5/1.0 Solubility: 6.5 |
| Military Specification: | MIL‐G=5634, Type 3 |
| Methoxyl: | 1.0 |
| Chlorine: | 1.5 |
| Ash: | 1.0 |
Walnut shell grit is the hard fibrous product made from ground or crushed walnut shells. Walnut shells are all natural, 100% silica free making them an environmentally abrasive for delicate blasting processes. The gentle cleaning action cleans surfaces with damaging the underlying material.
RXSOL Turbo Cleaner Dry Walnut Shell is natural organic materials with controlled particle size used for cleaning blades of gas side of exhaust-gas turbochargers in modern diesel engines. The specific structure of RXSOL Turbo Cleaner Dry Walnut Shell is such that when injected by means of compressed air upstream in the gas side of the turbine it causes a slight abrasive action which maintains the turbine is always clean.
Once injected in the turbine RXSOL Turbo Cleaner Dry Walnut Shell burn and disappear into the atmosphere through the stack without causing any detrimental chemical reaction. Although that method is efficient it presents a number of drawbacks such as reduction of the rpm of the engine during the entire cleaning process, which causes a loss of speed. Furthermore there is always the risk of forming corrosive acids in presence of sulfurous residualsin the discharge duct.
Instead of water, dry solid bodies in the form of granules like RXSOL Turbo Cleaner Dry Walnut Shell is used for cleaning. A certain quantity of them, depending on the turbocharger size, is blown by compressed air into the exhaust gas lines before the gas inlet casing On account of their hardness and composition (natural solid granules, size 1.3-1.7 mm.) RXSOL Turbo Cleaner Dry Walnut Shell have an excellent mechanical cleaning eff ect (soft blast). As a rule, a turbine should be cleaned every 24 to 48 hours of operation.
"WITH RXSOL TURBO CLEANER DRY WALNUT SHELL IT IS NOT NECESSARY TO REDUCE THE SPEED OF THE ENGINE."
"THERE IS NO RISK OF CORROTION DUE TO ACID FORMATION."
When used regularly, RXSOL Turbo Cleaner Dry Walnut Shell increase significantly the time between maintenance services. Obviously, maintaining the turbine in a perfectly clean condition gives trouble-free operation and improves efficiency.
Offer Walnut Shell pieces/walnut shell powder for chemical industrial.
Processing walnut shell pieces, walnut shell powder with any size. We process a large quantity per month and packing as per inquiry.
Product: Walnut shell pieces
Origin: INDIA
Grade:
-walnut shell pieces
-small shell pieces
-walnut shell powder
Packing: 1MT/flexi bag or bulk or as customer’s request in 25 Kg
Supply Location : Fujairah, Mumbai, Kandla, Kolkata, Visakhapatnam, Dubai, Sharjah, Abudhabi
For Export Min quantity: 1x40feet (20MT)
For Local Supply : 25 Kg BAG
Dry Walnut Shell manufacturer, exporter and supplier in Mumbai, Gandhidham, Chennai, Ennore, Kolkata Haldia, Paradip, Visakhapatnam, JNPT Nhava Seva, Fujairah, Ajman, Sharjah, Abudhabi, Dubai, Soahar Muscat Oman, Canada, Africa