Primary tabs

FREE SHIPPINGFree shipping on all orders over 100000 INR.

Antioxidant A 1076

0
No votes yet
SKU::RXSOL-81-8161-025

Product Qty Per Unit: 
25.00
Product usage unit: 
Kg.PWD

Negotiate Price

Generic Name: 
It is an effective, non-discoloring stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life.
Product Description: 

Antioxidant A 1076 is a sterically hindered phenolic antioxidant. It is an effective, non-discoloring stabilizer that provides excellent long-term heat stability by preventing thermo-oxidative degradation during processing and service life. This antioxidant also provides good compatibility with resins and excellent extraction resistance. It can be used in a wide variety of organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils, and fats.

Material Description: Antioxidant and Thermal Stabilizer

Product Application: 

Antioxidaint A 1076 is a primary antioxidant that can be applied in polyolefins, such as polyethylene, polypropylene, polybutene-1 and other polymers such as engineering plastics, styrene homo- and copolymers, polyurethanes, elastomers, adhesives, and other organic substrates. This high molecular weight phenolic antioxidant also provides excellent stabilization in other polymers such as styrenics, rubber modified styrenics including ABS, SAN and segmented block copolymers, saturated and unsaturated elastomers, PVC, urethane and acrylic coatings, adhesives and petroleum products.

Product Procedure: 

Loading Instructions:

The loading data and results are based on laboratory work (and field-testing) under controlled conditions and do not necessarily indicate the result that the buyer or user will attain. For this reason we strongly recommend testing of your own system under the actual conditions of processing and end-use prior to full scale testing. The recommended loading concentrations of Antioxidant A 1076 in the polymers range between 500 ppm and 2000 ppm. In polyolefins the loading concentrations range between 0.1% and 0.4% depending on substrate, processing conditions, and long-term stability requirements. Concentration levels of Antioxidant A 1076 in hot melt adhesives range from 0.2% to 1%, and in synthetic tackifier resins, Antioxidant A 1076 concentrations range between 0.1% and 0.5%. Exact loading must be determined by compositions of the specific polymer system.

Product Note: 

Advantages:
 Highly compatible with a wide range of organic substrates
 Easily incorporated by melting techniques due to its low melting point
 Non-staining and non-discoloring
 Excellent resistance to extraction
 Odorless and tasteless
 Improvement of long-term stability
 Low volatility
 Extensive FDA clearances
 Ease of compatibility with other stabilizers

Product Technical Specification: 

Appearance:                                      White Crystalline powder

Molecular Weight:                              530.9
Melting Range:                                  49 - 54°C
Color of Toluene Solution:                 25 APHA Max.
Color of Fusion:                                 60 APHA Max.
Volatile Matter:                                  < 0.5%
Ash                                                    < 0.1%
Solubility (10 g/100ml Toluene):        Clear (25C)
% Transmittance:                               425nm – 97% Min
                                                           500nm – 97% Min

Solubility: Solubility at 20 degree C (g/100ml solvent):

Solvent Solubility
Acetone 26%
Benzene 57%
Chloroform 57%
Cyclohexane 40%
Ethanol 1.5%
Ethyl Acetate 42%
n-Hexane 31%
Methanol 0.6%
Toluene 50%
Water < 0.01%

                                

Product pack size: 
25 Kgs
Product alias: 
<p> Sumilizer BP 76;Irganox 1076;Antioxidant 1076;Ultranox 276;Naugard 76;Mark AO 50</p>
Articles: 
Remarks: 

Packaging:

Antioxidant A 1076 is available in powder form in a 25 kg  net weight, with an inner PE liner.

Storage:

This product may be stored up to two years in a sealed container. Containers should be stored in a cool, dry area. Extended storage at elevated temperatures or exposure to direct heat or sunlight could reduce product life. Keep containers sealed when not in use.

Toxicity & Safety:

This material is not intended for use in products for which prolonged contact with mucous membranes or abraded skin, or implantation within the human body is specially intended, unless the finished product has been tested in accordance with the Food and Drug Administration and/or other applicable safety testing requirements. Because of wide range of such potential uses, Rx Marine International is not able to recommend this material as safe and effective for such uses and assumes no liability for any such uses. Read and understand the Material Safety Data Sheet before using or handling this product.

FDA Regulations: Supplement

 

Existing Regulations Maximum Concentration Thickness Food Allowed Temperatures Allowed
Antioxidant for polymers,        
Olefin copolymers complying with 177.1520 (c), excluding primarily non-crystalline copolymers described in items 3.4 and 3.5 0.25% no restrictions no restrictions no restrictions
Olefin polymers complying with 177.1520 (c), item 3.4 0.25% no restrictions all foods for which polymer is approved no restrictions
Olefin polymers complying with 177.1520 (c), item 3.5 0.25% no restrictions non-fatty foods no restrictions
Adhesives complying with 175.105 no restrictions no restrictions no restrictions no restrictions
Semi-rigid and rigid acrylic and modified acrylic plastics complying with 177.1010 0.01% no restrictions no restrictions no restrictions
Semi-rigid and rigid acrylic and modified acrylic plastics complying with 177.1010 0.2% no restrictions foods containing no more than 15% alcohol no restrictions
Polystyrene and rubber-modified polystyrene complying with 177.1640 0.25% no restrictions

no restrictions except for fatty foods

In fatty foods the finished rubber modified polystyrene polymers shall contain not less than 85 weight percent of total polymer units derived from styrene monome

no restrictions
Acrylonitrile-butadiene-styrene copolymers (used in accordance with prior sanction or in compliance with 174-178 and 179.45) 0.5% no restrictions no restrictions no restrictions
Semi-rigid and rigid vinyl chloride plastics modified with methacrylate butadiene-styrene copolymers complying with 178.3790 0.05% no restrictions no restrictions no restrictions
Rigid polyvinyl chloride 178.3790 0.2% no restrictions no restrictions no restrictions
Polycarbonate resins complying with 177.1580 0.3% no restrictions no restrictions room temperature or below fill and storage
Ethylene-vinyl acetate copolymers complying with 177.1350 0.1% no restrictions no restrictions no restrictions
Nitrile rubber-modified acrylonitrile-methyl acrylate copolymers complying with 177.1480 0.2% no restrictions no restrictions 150°F max.
(as for polymer)
Styrene block polymers complying with 177.1810 0.3% no restrictions all foods for which polymer is allowed 150°F max.
Vinylidene chloride homopolymers and/or vinylidene chloride copolymers complying with regulations in Parts 175, 176, 177, 179, and 181. The vinylidene chloride copolymers shall contain not less than 50% of total polymer units derived from vinylidene chloride 0.2% no restrictions no restrictions no restrictions
Chlorinated isobutylene isoprene complying with 177.1420 (a) (3) 0.025% no restrictions no restrictions no restrictions
Rubber articles complying with 177.2600 0.5% no restrictions no restrictions no restrictions

Antioxidant A 1076 manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai UAE, Muscat Oman, Kenya Africa. Get the best quality of Antioxidant A 1076 at a competitive price from us. We have ready stock of Antioxidant A 1076 in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.


Product Delivery Locations: 
Kattupalli Port ( L & T Shipbuilding Limited shipyard ), Ennore Port ( Coromondel International Limited Port Area ), Chennai Port, Mugaiyur port, Thiruchopuram port, Silambimangalam Shipyard, Parangipettai port, PY-03 Oil Field, Kaveri port, Vanagiri port, Thirukkadaiyur port, Thirukkuvalai port, Punnakkayal port, Udangudi port, Manappad port, Koodankulam port, Chettinad Tharangambadi Port, Mathur SIDCO Industrial area, Sipcot Industrial Park Malayambakkam