Primary tabs
Efflorescence Cleaner
SKU::RXSOL-15-1118-025
Product Qty Per Unit:
25.00
Product usage unit:
Ltr.
Generic Name:
Efflorescence Remover
Efflorescence Remover removes white, chalky residue efflorescence and mild rust stains found on concrete and masonry
Product Description:
RXSOL Efflorescence Cleaner and cleaning chemical effectively reacts and breaks down and removes stains efflorescence, Salt Deposits, Lime Stains, and Rust from concrete, brick, pavers, and other masonry surfaces.
Product Application:
RXSOL Efflorescence Cleaner can be safely used on a wide variety of building materials and architectural structure such as: Concrete, Blocks, Bricks, Cementitious plaster, Pavers.
RXSOL Efflorescence Coverage : 15 – 30 m2 per litre, depending on the extent of contamination.
Product Procedure:
Advantages of RXSOL Efflorescence Remover
Single component.
Ready to use.
Ideal for environments with high levels of salt air which can naturally create high calcium deposits.
Product Note:
Method of Use of RXSOL Efflorescence Remover
Before use, remove any loose debris from the work surface and ensure you have adequate personal protection. Use a stiff bristle brush to sweep down the affected area, With a hose, wet the wall surface with clean water. Immediately spread the product with a sponge, brush or sprayer. Leave the mixture to dwell for 2 - 5 minutes then hose off with clean water immediately.
In cases of heavy contamination it may be necessary to repeat this procedure.
In cases of heavy contamination it may be necessary to repeat this procedure.
Do not allow the product to dry on the surface.
As a final step, use detergent to neutralize the acid then wash it with clean water.
Product Technical Specification:
Product pack size:
RXSOL Efflorescence Cleaner is available in 5 and 25 litre drums.
Product alias:
Cleaning
All tools should be cleaned immediately after application with clean water.
Storage
RXSOL Efflorescence Cleaner has a shelf life of 12 months from date of manufacture if stored in dry conditions at 25⁰C in original unopened packs.
Cautions
Health and Safety
RXSOL Efflorescence Cleaner should be handled with care.
Avoid contact with skin or eyes.
In case of accidental contact, rinse immediately with clean water and seek medical advice. Suitable protective gloves and goggles should be worn.
For further information refer to the Material Safety Data Sheet.
Fire
RXSOL Efflorescence Cleaner is not flammable
#EfflorescenceRemover_IndiaUAEoman
#EfflorescenceCleaner_IndiaOMANuae
What is Efflorescence?
Efflorescence means powdery or crystalline deposit on masonry / concrete wall. Crystaline Deposit may be shade of white, brown, gray, or yellow appeal on walls.
Root Cause of Efflorescence on walls when water present in the building surfaces dissolves certain salts and migrates to other areas, leaving behind salty deposits as it evaporates. Efflorescence cleaning is a major problem when it comes to concrete surfaces.
Concrete efflorescence can be triggered by faulty waterproofing, humidity, rain, and condensation. While exterior efflorescence is tricky enough, treating interior efflorescence is considered even more challenging.
Remarks:
Efflorescence remover is a cleaning solution that removes white, powdery efflorescence buildup from hard surfaces like tiles, concrete, bricks, and pavers. Efflorescence is a white substance that results from salts that come from the inside of masonry.
Pressure washer: For fresh efflorescence, you can use a pressure washer to dissolve it quickly. This method is only suitable for exterior walls, and you'll need to dry the wall completely to prevent the salt from reappearing.
Pressure washer: For fresh efflorescence, you can use a pressure washer to dissolve it quickly. This method is only suitable for exterior walls, and you'll need to dry the wall completely to prevent the salt from reappearing.
Brush and water: For small amounts of loose efflorescence, you can scrub it with a stiff brush or wash it with a power washer.
Efflorescence Remover Cleaner Manufacturer and Supplier in India UAE Oman, Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Surat, Fujairah, Dubai, Sharjah, Ajman, Abudhabi, Muscat, Sohar, Barka, Oman, Yemen, Kuwait, Saudi Arabia
Product Delivery Locations:
Kattupalli Port ( L & T Shipbuilding Limited shipyard ), Ennore Port ( Coromondel International Limited Port Area ), Chennai Port,
Mugaiyur port, Thiruchopuram port, Silambimangalam Shipyard, Parangipettai port, PY-03 Oil Field, Kaveri port, Vanagiri port, Thirukkadaiyur port, Thirukkuvalai port, Punnakkayal port, Udangudi port, Manappad port, Koodankulam port, Chettinad Tharangambadi Port, Mathur SIDCO Industrial area, Sipcot Industrial Park Malayambakkam