Suitable to empty ballast tanks bilge wells etc.in emergency cases often used for draining cargo.
Product Description:
Suitable to empty ballast tanks,bilge wells,etc.in emergency cases often used for draining cargo and after the washing procedure.especially preferred where an electric spark may risk ignition or explosion .air pressure is 0.59MPa(6kgf/cm2)
Product Application:
|
IMPA CODE
|
CAPACITY
|
MAX. ALR CONSUMPTION
|
WATER HOUSE SIZE
|
AIR HOUSE SIZE
|
|
|
LIFT
|
DISCHARGE
|
|
591635
|
15
|
22m3/H
|
2.0m3/min
|
50mm
|
3/4
|
|
591636
|
20
|
28m3/H
|
3.4m3/min
|
50mm
|
3/4
|
|
591637
|
25
|
38m3/H
|
4.4m3/min
|
50mm
|
1
|
Product Technical Specification:
STORAGE:
When storing a sump pump for any length of time precautions should be taken to prevent corrosion and to maintain the pump in a serviceable condition.
-
Remove discharge and exhaust hose or pipe and run a pump out of water to blow out all moisture.
-
Remove the air line and pour a small amount of rust resistant oil in the live air inlet, re-connect hose and idle motor for a few minutes to carry oil to all internal parts.
-
Remove air hose and plug air inlet and air exhaust post with corks.
-
Wipe out the pump with rust resisting oil. Wrap pump in oiled paper and pack in covered box.
-
Store pump in dry place.
-
Product alias:
<p>
Pneumatic Sump Pump</p>
|
Sr.no
|
Description
|
Causes
|
|
1
|
Pump stopped and will not start
|
Insufficient air pressure
Check air pressure is as recommended at the pump air inlet.
Air filtered blocked
Check if debris has clogged the inlet filter on the FRL unit/pump inlet air valve(some models have air filter on the air inlet valve) and ensure clear passage of air
Internal damage or excessive wear on components
Proceed to dismantle the pump, examine components for wear,replace any worn components, reassemble carefully as instructed in this manual and re-start the pump.
|
|
2
|
Pump runs slowly, poor delivery.
|
Insufficient or wrong lubricant in the air supply.
Ensure that the lubricant is as per the recommended chart, a thicker lubricant aften makes the air valve work sluggishly.
Internal damage or excessive wear on components
Proceed to dismantle the pump,examine components for wear, replace any worn components,ressemble carefully as instructed in this manual and re-start the pump.
|
|
3
|
Motor is jammed
|
Worn or damaged rotor blades
Dis-assemble governor housing (7)and motor housing (35) clean all parts in a light solvent.replace worn or damaged parts and reassemble.
|
Pneumatic Submersible Pump manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Pneumatic Submersible Pump at a competitive price from us. We have ready stock of Pneumatic Submersible Pump in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
Product Delivery Locations:
Kattupalli Port ( L & T Shipbuilding Limited shipyard ), Ennore Port ( Coromondel International Limited Port Area ), Chennai Port,
Mugaiyur port, Thiruchopuram port, Silambimangalam Shipyard, Parangipettai port, PY-03 Oil Field, Kaveri port, Vanagiri port, Thirukkadaiyur port, Thirukkuvalai port, Punnakkayal port, Udangudi port, Manappad port, Koodankulam port, Chettinad Tharangambadi Port, Mathur SIDCO Industrial area, Sipcot Industrial Park Malayambakkam
