Primary tabs

Alkalinity Control 20 Ltrs Manufacturer and Supplier in Tuticorin Port,Chennai Port,Kaaupalli Port Sriperumpudur,Vellore,Bergur,Kanchipuram,Tiruvannamalai,Krishnagiri,Tuticorin,Kudankulam etc.

Ennore Chemical International is a leading Manufacturer and Supplier of. Alkalinity Control 20 Ltrs. in Tamil Nadu
which has three major ports at Tuticorin, Chennai, Ennore and fifteen minor ports at Cuddalore,
Rameswaram, Kattupalli, Thiruchopuram, Manappad , Kudankulam etc.

RXSOL-50-5002-020 is a concentrated liquid alkaline product for corrosion and Calcium scale control in boilers.
Suitable for low-pressure boiler systems (0-32 bar) , medium-pressure steam propulsion vessels (32-60 bar). And also suitable to used for high pressure steam generating systems (60-84 bar).

Mechanism : It converts calcium hardness into soft, non-adherent sludge that is easily removed by blowdown.

The presence of alkalinity in a water sample may be due to many different substances. However, for the sake of simplicity, the presence of bicarbonate, carbonate, and hydroxide ions is commonly considered as alkalinity. The points of change in colour of phenolphthalein and methyl orange indicators, which occur at pH 8.3 and pH 4.3 provide standard reference points which are almost universally used to express alkalinity.

Very high alkalinity values can be undesirable in an industrial water supply. For example, the presence of a high methyl orange alkalinity should be avoided in boiler feed water because of the resultant carbon dioxide content of the steam. Carbon dioxide usually is responsible for the corrosion of steam and return lines. High boiler water alkalinities are also undesirable because the presence of high hydroxide ion concentration is the primary cause of caustic metal embrittlement. A very high boiler alkalinity can also lead to an undesirable carryover condition. On the other hand, the alkalinity of boiler water must be sufficiently high to protect the boiler metal against acidic corrosion and to ensure precipitation of scale forming salts. Usual treatment approaches include setting both a minimum alkalinity level and an operating range.

Hydroxide alkalinity may be determined by adding barium chloride prior to titration to precipitate the carbonate ion from solution, allowing direct titration of the hydroxide alkalinity. Measurement of hydroxide alkalinity is also used to control lime soda softeners.

In cooling water systems, alkalinity is of major importance since the total alkalinity of a water is one factor that must be considered when predicting the tendency for the water to precipitate calcium carbonate scale. Depending on the choice of chemical treatments to protect against corrosion and scale formation, the operating alkalinity and pH ranges are chosen to balance these two features.

Alkalinity Titrimetric Method (0-200 ppm)

Principle Theory

This test is based on the determination of alkalinity by titration with standard acid to the phenolphthalein color change (or to a pH of 8.3) and to the methyl orange color change (or a pH of 4.3). For determination of hydroxide alkalinity only, barium chloride is added prior to titration to precipitate the carbonate ions. Titration is then taken only to the phenolphthalein end point. A pH meter may be used instead of the indicators to determine the end points of the titration

We commit you the best quality, huge quantity and fast delivery time. Please find link  to get more
details like MSDS, Technical specification of Unipol-RX . If you are interested in our products,
please do not hesitate to drop me an email: ennorecheminternational@gmail.com.  We would like
to assist you immediately. We have ready stock of Unipol-RX available in package size 5,10,25, 50,
200 liters On location in Tuticorin Port, Chennai Port, Ennore Port, Kattupalli Port  in India.

Contact us: http://ennoreindiachemicals.com/contact-us.

Share this post

Categories