Primary tabs

RO Antiscalant For RO Plant Supplier in Tuticorin, Cuddalore, Chennai, Tamil Nadu.

RO Antiscalant For RO Plant

Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron.

RO Antiscalants are dosed directly to the RO feed water tank or feed water line (after pretreatment) at the recommended dosage of 1-3 mg/L and maximum dosage at 8mg/L, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. Maximum dilution should be 10% with RO or DI water for temperature less than 30 deg C. For higher temperature the dilution ratio can increase.

Key Features and Benefits

    Inhibit scale formation and effectively controls corrosion
    Protects the membrane efficiently
    Enhance the plant operation and equipments life span
    Economical
    Easy in usage and handling

our RO Antiscalant (HIGH PH) is a super-threshold RO membrane antiscalant and antifoulant which is able to stabilize a wide range of supersaturated salt solutions, thereby preventing the precipitation on the membrane surface.

It reduces the risk of scaling and eliminates the use of hazardous acids,resulting in efficient plant operation with highest possible conversion rate.

It is a very effective antiscalant . It is also compatible with ALSTAFLOC series of coagulant and flocculants (polyelectrolytes). Our RO Antiscalant (HIGH PH) is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica.

Key Features and Benefits

    Effective scale inhibition
    Alkalinity builder
    High recovery rate
    Low Chemical dosage
    Cost Effective
    Effective Iron fouling control by sequestration
    Reduced frequency of membrane cleaning
    Compatible with all types of membranes
    Completely organic and biodegradable

Application and Dosage
Our RO Antiscalant (HIGH PH) is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 1ppm and maximum dosage at 15ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content.

In case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 10-15ppm for stabilizing Calcium.

At about 10-15ppm dosage our RO Antiscalant (HIGH PH) is capable of fully inhibiting iron and calcium, and silica up to 166ppm. For higher silica content RXSOL ANTISCALANT should be used.

Antiscalant RO                                     RXSOL-33-3302-025
Antiscalant C.I ALKA                         RXSOL-33-2034-025
Membrane Antiscalant ALKA 191T   RXSOL-33-3321-030
Antiscalant ORG EV 2030                  RXSOL-33-3325-230
Antiscalant RXSOL ORG EV             RXSOL-33-3327-240

We offer material in various packs and sizes which varies from customer to customer as per there requirement. Our complete product range is formulated using quality ingredients and accurate chemical composition, which make them highly preferable and acceptable in industry. By adopting latest methods of production, we have kept ourselves ahead of close business competitors and in tune with the growing market challenges.

If you have any query related to product; feel free to contact us on Email :- ennorecheminternational@gmail.com

Share this post

Leave a comment

Filtered HTML

  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <blockquote> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Lines and paragraphs break automatically.

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
Image CAPTCHA
Enter the characters shown in the image.

Categories